XCMG 3 ton F series Wheel Loader LW300FN High efficiency and reliability Model Characteristics It features high efficiency, energy-saving, and strong power. The three-element torque converter and the fixed shaft power shift transmission feature high maturity and reliability. The 2600mm wheelbase features high mobility and flexibility and is applicable to all kinds of working sites. The bucket is made of high strength material to realize high wear and impact resistance. The diversified configurations and complete attachments adapt to the construction needs in different regions and under different working conditions. The optional A/C and the sound insulation and noise reduction measure build elaborately a comfortable operating environment. Performance Highlights Outstanding capability, with traction at ≥9t and breakout force at ≥13t. High adaptability, with turning radius at 5,165mm (tire center). Market position Industry 3t single-model sales champion. Excellent quality power and drive systems  Strong power China-II emission compliance, high performance, and low fuel consumption With strong power and high torque reserve factor, this engine meet the instant overload demand during operations and sufficiently provides the power required for heavy-load operations. Classic and reliable Transmission and torque converter assembly The countershaft power shift transmission features high maturity and reliability. The three-element torque converter ensures the maximum utilize tion of engine power. The drive shaft flanges are of international standard specification and the distribution diameter of the fastening bolts is enlarged to realize super-strong torsion resistance and adapt to high strength and heavy-load continuous operations. Enhanced heavy-duty drive axle of outstanding performances All load carrying portions are solid and firm enough to ensure excellent overload resistance and meet the needs of various high strength and high load operations. Firm and reliable super-strong heavy-duty structural parts. Super-strong structure The finite element analysis technology is applied for structural parts to reduce the stress concentration, eliminate the partial weaknesses, and thoroughly adapt to diversified working conditions. The lengthened bucket bottom and the sharp bucket shape ease the penetration and realize higher bucket loading capacity. The contracted flare angle and the reduced cross section ease penetration and lifting. Diversified attachments Standard bucket suitable for diversified working conditions. Rock bucket: It's dedicated for handing of hard materials (such as rock), featuring good resistance against wear and impact. Coal bucket: It's dedicated for handling of bulk materials (such as coal), featuring high bucket capacity and high efficiency. International quality hydraulic and electric units The first-class hydraulic units ensure low pressure loss, less system heating, and high reliability. The international quality hydraulic hoses applied feature high heat and pressure resistance and long life. The hydraulic pipelines adopt double sealing means (DIN standard 24º taper thread + O-ring) to achieve better sealing performance and effectively solve the leakage problem. The harnesses are made of imported quality material and the process layout is optimized to ensure reliable electric circuit system. Convenient Maintenances The framework structure engine hood and the uplift large side doors boast large opening angle and make the checking, repair, and maintenance easier for the engine and radiator. The central fuse case centrally indicates the working status of electric system and eases the maintenances. The independent chamber design for oil return line of hydraulic oil tank guarantees the convenient maintenances. Variety attached tools meeting requirements of different working conditions Clamp: For grab and transport of various woods and tubing. Bale grabber: It's used for the grabbing and handling of various light materials in farms, biological power plants, and paper mills. Contact: Tony Han No. 1 Industrial District, Xuzhou Economic & Development Zone, Xuzhou China Tel:+86 18552473186  Â
This device is a special device to cut steel strip rolls into strips with a certain width. It is mainly used for decoiling cutting into strips and coiling of silicon steel sheets and thin steel plates and is applicable to processing and production of plate sheets for transformers, motors and transformers.
Slitting line,Shear Cutting Machine,Steel Strip Shearing Line,Automaic Shearing Line,Shearing Steel Strip Machine JINAN EURO-ASIA MACHINERY CO., LTD , https://www.sdwindingmachine.com
Optimized bucket shape
Item
Specification
Unit
Rated operating load
3000
kg
Bucket capacity
1.5~2.5
m³
Machine weight
10600±200
kg
Dump clearance at maximum lift
2770~3260
mm
Reach at maximum lift
1010~1210
mm
Wheel base
2600
mm
Tread
1850
mm
Height of hinge at maximum lift height
3830
mm
Working height(fully lifted)
4870
mm
Max.breakout force
130
kN
Max.horse power
95
kN
Hydraulic cycle time-raise
5.5
s
Total hydraulic cycle time
10
s
Min. turning radius over tyres
5165
mm
Articulation angle
35±1
°
Gradeability
28
°
Tyre size
17.5-25-12PR
Â
Overall machine dimension L×W×H
7050×2482×3118
Â
Model
WP6G125E22
Â
Emission standards
Emission 2
Â
Rated Power/Speed
92/2300
kW/rpm
Fuel Tank
170
L
Hydraulic Tank
170
L
Travel speed
I-gear(F/R)
8/10
km/h
II-gear(F/R)
13/30
km/h
III-gear(F)
24/-
km/h
IV-gear(F)
40/-
km/h
XCMG sales Manager
XCMG 3ton 5ton Wheel Loaders Lw300fn/Lw500fn Best Price
Model NO.: LW300FN
Type: Medium-sized Loader
Trademark: XCMG
Transport Package: Suit for Export
Specification: 7050× 2482× 3118mm
Origin: Xuzhou, Jiangsu, China
HS Code: 84295100