Construction Hoist Safety Device
Safety is one of the most important for Construction Hoist, thus the Construction Hoist Safety Device is required. SAJ safety device is a product of BQ. When a cage over-speeds the device should act cut off the power stop the cage on mast gradually. The safety device is adjusted and sealed. Do not disassemble it. The using time limit of safety device are signed on it`s nameplate. Safety device must be delivered to the factory and inspected after it reached to time limit.
Safety device board is the connected part between safety device and other structures, it can take the impact of stopping the cage. There are installed lower speed switch, upper travel limit switch and final limit switch, once the switchs touch the relevant cam the cage will act.
We also supply other spare parts for construction hoist, such as construction hoist Mast Section, Construction Hoist Anchorage Frame, Passenger Hoist Cage, Construction Hoist Overload Protector, Sliding Contact Line, Construction Hoist Motor, Construction Hoist Reducer and so on.
SAJ Safety Device,Passenger Hoist Safety Device,Construction Hoist Overload Protector,Overload Limiter,Anti-fall Device SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytopkittowercrane.com
First, all relevant units must take a highly responsible attitude toward the people, the employees, and the enterprises, and effectively put environmental safety work in the first place.
Second, we must strengthen the environmental management of construction projects and effectively prevent environmental risks from the source. Chemical parks, bases, and other parks and bases that have toxic and hazardous substances construction projects must carry out planning and environmental assessment work; new construction projects for chemical and petrochemicals and construction projects that contain toxic and hazardous substances should undergo environmental risk assessment; evaluation content should be improved and no major Environmental risks are hidden; construction projects must adhere to environmental protection “three simultaneouss†and improve environmental risk emergency plans and accident prevention measures; Fourth, the project site selection should be reasonable to avoid environmental sensitive areas.
Third, speed up the "three wastes" governance. All units that do not meet the standard of "three wastes" discharge must raise funds, formulate plans, build environmental protection facilities, and achieve discharge standards; they must actively promote cleaner production, increase efforts to implement circular economy, energy conservation, and water conservation, and reduce pollution.
Fourth, all management systems and environmental emergency plans must be implemented. Environmental protection facilities and emergency treatment facilities must ensure normal operation, completely eliminate environmental hazards, and eliminate environmental pollution accidents.
V. All units should immediately carry out a comprehensive investigation of all kinds of environmental pollution hazards. All kinds of key pollution sources and hazardous chemicals and radioactive sources must be comprehensively inspected. Disposal of potential hazards must be promptly disposed, practical and feasible rectification programs should be formulated, and dedicated personnel must be supervised and urged to rectify and eradicate all major environmental pollution incidents at the source. occur.
Sixth, accelerate technological progress and promote industrial upgrading. Accelerate the development of low-energy-consuming and low-emission tertiary and high-tech industries, use high technology, clean production, and advanced and applicable technologies to transform traditional industries with high energy consumption and heavy pollution, and develop high-tech industries that save energy, reduce consumption, and reduce pollution. .
Association issues notice on environmental safety rectification
On February 17, 2006, the reporter obtained information from the China Petroleum and Chemical Industry Association. In order to coordinate national environmental safety rectification activities carried out by relevant state agencies, the Petrochemical Association issued a notice to the whole industry and requested to do a good job in the following six aspects.