Chu Sheng compressed garbage truck performance introduction

1. The electromechanical-hydraulic integration technology with one-touch operation and the use of the microcomputer- controlled intelligent control program of the microcomputer can automatically complete the single-cycle or continuous-cycle garbage loading operation with a single button press. The operation is very convenient.

2,
The compression ratio is high, and the garbage compression ratio can be up to 1:2.5 . When the domestic garbage is compressed, the density can reach 0.5-0.8 t/m3 and the load is large.

3,
High loading efficiency, one cycle time for loading operation is less than 30 seconds , and one cycle time for unloading operation is less than 40 seconds.

4,
Two operating modes, electric button operation and handle operation, are set to facilitate debugging and maintenance. Both operation modes can work independently. When the electrical system fails, the operation can be continued with the handle to ensure the work efficiency.

5,
In the cab and the rear of the vehicle, operation buttons are set separately. When unloading garbage in the garbage dump, the operator does not need to get off the vehicle. The whole process of unloading the garbage can be completed in the cab, which is very convenient.

6,
Filler and car body joints adopt special-shaped sealing strips to be hydraulically locked so that garbage can be reliably sealed in the box body to prevent leakage of waste and sewage.

7,
In the hydraulic circuit of the lifting filler, there is a safety device that prevents bursting of the tubing and sudden drop of the filler to improve the safety of use.

8,
The emergency brake button is specially set on the car to stop the garbage packing device in any state or any position and to ensure the safety of the operator and the equipment.

9,
Imported parts are used for key control components to ensure that the garbage truck can operate stably and reliably.  

Slotted Strut Channel

Strut Channel provides light structural support for wiring, plumbing, or mechanical components. It has inward-facing lips for mounting nuts, braces, or connecting angles to join lengths of strut channels together. It is also used to connect pipes, wire, threaded rods, or bolts to walls. Most strut channel has slots in the base to facilitate interconnection or to fasten the strut channel to building structures. Strut channel is easy to connect and modify, and different channel styles can be mixed and matched. It's commonly used in the electrical and construction industries. Strut channel can be used to create a permanent structure that supports wiring around a property, or it can temporarily store different types of machinery and wires for short-term projects.

Slotted Strut Channel,Mild Steel C Channel,Shallow Strut Channel,Stainless Steel Slotted Channel

Suzhou Bim Metal Technology Co., Ltd. , https://www.szbimmetal.com