Gasoline Generator Set,Small Generator,Generator Set,Yamaha Portable Generator Raygong Electrical Machinery Co., Ltd. , http://www.fagenerator.com
Introduction
The equipment is special for automobile beam welding, widely used in building steel structure, the crossbeam of the automobile and engineering machinery " H/I " beam welding production, adopts centralized control system. Main composed of Gantry frame, two sets of MZ-1000 submerged arc welding power supply, two sets of horizontal electric mobile slider, two sets of electric hanging head, two sets of automatic tracking mechanism, two sets of flux recovery machine and control system etc.. With high efficiency, good welding quality is the ideal equipment for H type and "I "beam welding.
Parameter
Height of gantry frame (distance between beam and ground)Â Â Â Â Â Â Â Â Â 1.2m
Torch lifting stroke (Up Down) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 200mm
Torch longitudinal travel                       700mm
Gantry frame travel motor power                   0.75KW×2
Gantry frame travel welding speed                  250-1200mm/min
Fast return speed                          2880mm/min
Gantry frame Guide rail center distance: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3m (user prepare)
Length of guide rail                         Customizable
   Beam web plate height                      150-800mm
   Beam pterygoid lamina width                   120-800mm
Certification
Service
Warranty:Â 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Â
Service condition:
1)Â When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
2)Â If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
3)Â When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
Introduction
The equipment is special for automobile beam welding, widely used in building steel structure, the crossbeam of the automobile and engineering machinery " H/I " beam welding production, adopts centralized control system. Main composed of Gantry frame, two sets of MZ-1000 submerged arc welding power supply, two sets of horizontal electric mobile slider, two sets of electric hanging head, two sets of automatic tracking mechanism, two sets of flux recovery machine and control system etc.. With high efficiency, good welding quality is the ideal equipment for H type and "I "beam welding.
Parameter
Height of gantry frame (distance between beam and ground)Â Â Â Â Â Â Â Â Â 1.2m
Torch lifting stroke (Up Down) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 200mm
Torch longitudinal travel                       700mm
Gantry frame travel motor power                   0.75KW×2
Gantry frame travel welding speed                  250-1200mm/min
Fast return speed                          2880mm/min
Gantry frame Guide rail center distance: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3m (user prepare)
Length of guide rail                         Customizable
   Beam web plate height                      150-800mm
   Beam pterygoid lamina width                   120-800mm
Certification
Service
Warranty:Â 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Â
Service condition:
1)Â When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
2)Â If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
3)Â When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
Gantry Welding Machine Equipment for Special H Beam
Model NO.: HF
Welding Method: Submerge Arc Welding
Gantry Height: 1200mm
Torch Longitudinal Travel: 700mm
Gantry Frame Travel Welding Speed: 250-1200mm/Min
Machine Structure: Gantry Type
Torch Lifting Stroke: 200mm
Beam Web Plate Height: 150-800mm
Fast Return Speed: 2880mm/Min
Trademark: Huafei or OEM
Transport Package: Wooden Package
Specification: According to your requirment
Origin: China
Model NO.: HF
Welding Method: Submerge Arc Welding
Gantry Height: 1200mm
Torch Longitudinal Travel: 700mm
Gantry Frame Travel Welding Speed: 250-1200mm/Min
Machine Structure: Gantry Type
Torch Lifting Stroke: 200mm
Beam Web Plate Height: 150-800mm
Fast Return Speed: 2880mm/Min
Trademark: Huafei or OEM
Transport Package: Wooden Package
Specification: According to your requirment
Origin: China
Gantry Welding Machine for Special H Beam
Gantry Welding Machine for Special H Beam