Hot Water and Booster Coils
Posted on

Model NO.: FP
Fin Thickness: 0.105mm-0.4mm
Liquid Flow Rate: 2.5m/S
Tube Type: Smooth Tube, Thread Tube
Maximum Working Pressure: 3.0mpa
Structure: Fin Type Heat Exchanger
Refrigerant: R417A/R407c/R404A/R410A/R22/R134A
Cooling Method: Direct Cooling
Trademark: Shenglin
Transport Package: Wooden Packing
Specification: CE, ISO, ROHS, BV, SGS
Origin: Shanghai, China(Mainland)
HS Code: 8415909000
Model NO.: FP
Fin Thickness: 0.105mm-0.4mm
Liquid Flow Rate: 2.5m/S
Tube Type: Smooth Tube, Thread Tube
Maximum Working Pressure: 3.0mpa
Structure: Fin Type Heat Exchanger
Refrigerant: R417A/R407c/R404A/R410A/R22/R134A
Cooling Method: Direct Cooling
Trademark: Shenglin
Transport Package: Wooden Packing
Specification: CE, ISO, ROHS, BV, SGS
Origin: Shanghai, China(Mainland)
HS Code: 8415909000
Hot Water and Booster Coils
Brief description:
1. Can be customerized
2. Work Pressure: 0.2~3.1MPa
3. Fin space: 1.2~3.5mm
4. Tube Diameter: 7, 7.94, 9.52, 12.7, 16mm


The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing
Fin Pattern Copper Tube O. D. (mm) Row Space(mm) Hole Space(mm) Fin

Thickness(mm)
 		 Fin Space(mm)
Flat fin Sine wave with blade fin Smooth sine wave fin Window fin Sesamoid fin
A 7 12.7 21 0.105 / / 1.3 1.3 /
B 7 13.2 17.6 0.105 / / 1.3 1.3 /
C 7 12.7 20.4 0.105 / / 1.3~1.8 1.3~1.8 /
D 7.94 15.88 25.4 0.105 1.8~3.0 1.8~3.0 1.8~3.0 1.8~3.0 /
E 9.52 22 25.4 0.105~0.15 1.6~3.2 1.6~3.2 1.6~3.2 1.6~3.2 /
F 9.52 22 25.4 0.18~0.4 3.5~6.35 / / / /
G 9.52 21.65 25 0.105~0.18 1.6~3.2 1.6~3.2 1.6~3.2 1.6~3.2 /
H 9.52 21.65 25 0.15~0.24 3.2~6.35 3.2~6.35 3.2~6.35 / /
I 12.75 27.5 31.75 0.115~0.15
 		 1.5~3.5 1.5~3.5 1.5~3.5 1.5~3.5 1.6~3.2
J 15.88 33 38.1 0.115~0.15 1.5~4.0 1.5~4.0 1.5~4.0 / /
K 15.88 34.64 40 0.115~0.15 / 2.6~3.5 2.6~3.5 / /


Hot Water and Booster Coils
Hot Water and Booster Coils
Hot Water and Booster Coils
Hot Water and Booster Coils
Hot Water and Booster Coils
Hot Water and Booster Coils

Note: for further information please contact me.
 
Ms. Echo Lee
 
Tel: +86 21 35324169-206
 
Mob : +86 18217219074

 


  Hot Water and Booster Coils
Brief description:
1. Can be customerized
2. Work Pressure: 0.2~3.1MPa
3. Fin space: 1.2~3.5mm
4. Tube Diameter: 7, 7.94, 9.52, 12.7, 16mm


The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing
Fin Pattern Copper Tube O. D. (mm) Row Space(mm) Hole Space(mm) Fin

Thickness(mm)
 		 Fin Space(mm)
Flat fin Sine wave with blade fin Smooth sine wave fin Window fin Sesamoid fin
A 7 12.7 21 0.105 / / 1.3 1.3 /
B 7 13.2 17.6 0.105 / / 1.3 1.3 /
C 7 12.7 20.4 0.105 / / 1.3~1.8 1.3~1.8 /
D 7.94 15.88 25.4 0.105 1.8~3.0 1.8~3.0 1.8~3.0 1.8~3.0 /
E 9.52 22 25.4 0.105~0.15 1.6~3.2 1.6~3.2 1.6~3.2 1.6~3.2 /
F 9.52 22 25.4 0.18~0.4 3.5~6.35 / / / /
G 9.52 21.65 25 0.105~0.18 1.6~3.2 1.6~3.2 1.6~3.2 1.6~3.2 /
H 9.52 21.65 25 0.15~0.24 3.2~6.35 3.2~6.35 3.2~6.35 / /
I 12.75 27.5 31.75 0.115~0.15
 		 1.5~3.5 1.5~3.5 1.5~3.5 1.5~3.5 1.6~3.2
J 15.88 33 38.1 0.115~0.15 1.5~4.0 1.5~4.0 1.5~4.0 / /
K 15.88 34.64 40 0.115~0.15 / 2.6~3.5 2.6~3.5 / /


Hot Water and Booster Coils
Hot Water and Booster Coils
Hot Water and Booster Coils
Hot Water and Booster Coils
Hot Water and Booster Coils
Hot Water and Booster Coils

Note: for further information please contact me.
 
Ms. Echo Lee
 
Tel: +86 21 35324169-206
 
Mob : +86 18217219074

 


 

Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. The mold

cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminum, magnesium, lead and tin based alloys.

Custom Die Casting Service/Parts

Die Casting Parts,Custom Die Casting Parts,Aluminum Die Casting Parts,Brass Die Casting Parts

Ningbo Allytech Imp. & Exp. Co., Ltd. , http://www.allytechchina.com