The lubricating oil on the truck is the most frequently used consumable at the time of maintenance. And those with high-quality lubricating oil on the truck, not only can well protect the crane with the engine, but also can reduce the amount of oil change. At this temperature, which is shoulder to shoulder with the sun, it is necessary to pay special attention to lubricants, because the current weather is very easy to cause the failure of the crane due to the improper use of lubricants. Then when using lubricants, you may all make several mistakes.

For the oil control of the lubricating oil on the truck, it is necessary to use the upper and lower scales of the oil dipstick for better filling standards. After the vehicle's lubricating oil is overfilled, it will enter the combustion chamber from the gap between the piston and the cylinder, and it will create carbon deposits. And these carbon deposits will cause the compression ratio of the engine, and there will be a tendency of blasting. When the carbon deposit of the crane is in the cylinder, it will show a situation where it is easier to pre-ignite. And when entering the cylinder and the piston, it will cause the wear between the two. At the same time, it will also increase the pollution of vehicle lubricants. In addition, after the amount of vehicle lubricating oil is overfilled, there will be a large increase in the resistance and fuel consumption of the shaft.

Then if there is no lubricating oil added to a clear dispersant in the lorry, as long as there is a problem with the oleaginous oil and the oil, then there is a possibility of deterioration. The crane-mounted lubricating oil used today is required to be decomposed. The cleaning agent of the truck crane can be used to deposit the adhesive film and carbon deposit on the piston to the cleaning vehicle, and to disperse it in the oil, and it is better to reduce the generation of the engine's high-temperature sedimentation objects. Ming Lubricants will become dark after use for a period of time, but the quality and the oil at this time are consistent without deterioration.

Plastic Vacuum Forming Machine

foam food box plate dish tray ceiling Vacuum Forming Machine

have two kinds : semi-automatic forming machine and fully automatic forming machine

Plastic Vacuum Forming Machine,Plastic Forming Machine,Industrial Vacuum Forming Machine,Vacuum Former Plastic

haiyuanmachinery , https://www.foamfoodboxmachine.com