Company Name Xiagong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd.

★Product Name Fuel Truck★Product Model CSC5110GJYE5

Vehicle parameters

★Dimensions (length × width × height) mm 6900 × 2200 × 2750

★The size of the cargo compartment panel (length × width × height) mm or volume m3 8.3

★Preparation quality kg 4725 ★Total mass kg 11495

★Drive type 4X2

Chassis configuration and technical parameters

★Chassis manufacturer Dongfeng Motor Corporation

★ Chassis model EQ1111GLJ

★ Engine manufacturer Dongfeng Chaoyang Chaochai Power Co., Ltd.

★ Engine model CY4SK251

★Transmission model DF5S470

★ final reducer speed ratio (drive axle speed ratio) 5.125

★ tire specifications model 8.25R20

★ Comprehensive fuel consumption L/100km 20.5

★ 50km/h no-load constant-speed fuel consumption L/100km 12.9

Guowu Dongfeng Dollyka fuel truck configuration: L series cab, wheelbase 3800, Chaoyang engine CY4SK251 power 115 kW, 192mm variable section frame, front axle 2.2 tons, rear axle 4.2 tons, 7.50R16 steel wire tire, single row 2030 driving Room, 24 volt battery, without air conditioning, power steering, air brake, no air brake, clutch assist, 5-speed gearbox, ABS, front disc rear drum, speed limit device, driving recorder. Transport medium: light fuel oil (diesel, density: 830 kg / m3, gasoline, density: 700 kg / m3), category number: 3; effective volume of the tank 8.3 cubic meters; tank dimensions (length × width) ×高) (mm): 4800×2000×1280 (the tanker unit is mounted on the left or right side of the frame, and the installation position can be changed back and forth). The maximum volume is 10 cubic meters.

[Main technical parameters of Guowu Dongfeng Dollyka fuel truck]

Product trademark Chusheng

Announcement batch 288

Product name CSC5110GJYE5 type fuel truck

Product No.ZM2R759902D

Total mass (Kg) 11495

Tank volume (m3) 8.3

Rated load mass (Kg) 6575,6640

Dimensions (mm) 6900×2200×2750

Curing quality (Kg) 4725

Cargo size (mm) × ×

Rated passenger (person)

Quasi-trailer total mass (Kg)

Number of passengers in the cab (person) 3,2

Load mass utilization factor

Approach angle / departure angle (°) 22/15

Front overhang / rear overhang (mm) 1250/1850

Number of axes 2

Wheelbase (mm) 3650, 3800, 3950, 4200, 4500

Axle load (Kg) 4825/6670

Maximum speed (Km/h) 80

Other 1, transport medium: light fuel oil (diesel, density: 830 kg / cubic meter, gasoline, density: 700 kg / cubic meter), category number: 3; effective volume of the tank 8.3 cubic meters; tank size ( Length × width × height) (mm): 4800 × 2000 × 1280 (the tanker unit is mounted on the left or right side of the frame, and the installation position can be changed back and forth). Refueling device model and manufacturer: BL1111Z/Zhuhai Beiling Refueling Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokent Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Shanghai Bolai Machinery Co., Ltd., SK20QF-111A, SK20QF- 222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd., ZH6444/Foshan Zhongze Electromechanical Technology Co., Ltd. 2, the side protection is cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 350mm, a section width of 50mm, and a lower edge of 500mm from the ground. 3. Select the cab with the chassis, only the chassis with the radial tire, the speed limit device and the front disc brake; the vehicle is equipped with a tachograph with satellite positioning function. The ABS model is 3631010-C2000, and the manufacturer is East Cochnoll Commercial Vehicle Brake System (Shiyan) Co., Ltd.

Environmental Notice:

(This article comes from Xiagong Chusheng)

Cheap Automatic Screw Feeder

Cheap Automatic Screw Feeder ,Portable Automatic Screw Feeder,Assembly Automation Screw Feeders,Automatic Screw Loader

Ningbo Nbu Ad Design Co., Ltd. , https://www.nbuto.com