(1) Preparation of raw materials. Preparation of raw materials before flotation includes grinding, mixing, dosing, stirring, and the like. After grinding, the particle size of the raw material must meet certain requirements. The main purpose is to dissociate most of the useful minerals from the inlaid state. The other purpose is to enable the bubbles to carry the ore particles up. Generally, it needs to be ground to less than 0.2. Mm. Slurrying refers to the mixing of raw materials into pulp of suitable concentration. Various flotation agents are added later to enhance the difference in floatability between the useful mineral and the gangue mineral surface. The purpose of the agitation is to make the flotation agent and the surface of the ore particles fully effective. (2) Stirring and aeration. The stirring aerator of the flotation machine is used for agitation and air is sucked in, and a special compressor device can also be provided to press the air in. The purpose is to make the ore particles in suspension, and at the same time produce a large number of suitable and relatively stable bubbles, causing the mineral particles to collide with the bubbles. (3) Mineralization of bubbles. After acting on the flotation agent, the surface hydrophobic mineral particles can adhere to the bubbles and gradually rise to the slurry surface to form a mineralized foam. The surface hydrophilic ore particles cannot adhere to the bubbles and remain in the slurry. This is the most basic behavior of flotation separation of minerals. (4) Scraping of mineralized foam. In order to maintain continuous production, the mineralized foam is discharged in time, and the scraper of the flotation machine scrapes it out. This product is called “foam concentrateâ€. The product left in the pulp and then discharged is called “tailingsâ€.
Aluminum Ultra Flat Sheet is a special kind of Aluminum Sheet.It has high standard on surface flatness.As a result Aluminum Ultra Flat Sheet is suitable using in the electronic products surface parts or those application which has high requirement regarding the surface conditions.The advantage of aluminum sheet is as follows:
1. Easy to process. Flat Aluminum Plate, 6061 Aluminum Sheet, Aluminium Flat Sheet, Ultra Flat Aluminum Sheet Trumony Aluminum Limited , https://www.szaluminumplate.com
2. Good conductivity and thermal conductivity.
3. The density is small.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.
What are the stages of the flotation process?