The quick shutter door consists of several components, including a motor that provides power performance, an electrical box that serves as a control system, a curtain, a transparent window, and so on. The quality of the quick shutter door installation is reflected in the installation, in addition to the quality of the components themselves. With high installation quality, quick shutter doors can operate longer and more smoothly, eliminating many unnecessary troubles during use.

Before installation, the installer must be familiar with the installation drawings of the quick door, check whether the line of the quick shutter door is in place, and prepare for other installations, including parts and tools that need to be used.

Before installation, you must check whether the size of the door is consistent with the size of the opening; whether the number of guide rail brackets is correct; whether the hole embedded parts and the embedded parts of the bracket are correct.

Process flow is roughly divided into: hole handling, elastic line, fixed reel gear, no-load test, loaded curtain, mounting rail, test run, clean up.

Hole handling: Check whether the hole is consistent with the size of the product. Generally, the width and height of the hole should not be more than 5m. The location and quantity of embedded parts should be checked.

Lines: Measure the height of the hole and eject the two guide rails vertically and the centerline of the reel.

Fixed reel and transmission device: Weld the backing plate on the embedded iron plate, fix the left and right brackets of the reel with screws, install the reel, the reel should be flexible after installation, install the reducer and transmission system, install the electrical control system .

No-load test: After power on, check the motor motor, whether the working condition of the reducer is normal, and whether the reel rotation direction is correct.

Drapery: Assemble the panels and install them on the drum.

Installation guide rail: According to the position specified on the drawings, the two sides and the upper guide rails are welded to the wall embedded parts and welded together. Each guide rail should be in the same vertical plane.

Test run: First manually test run, open and close several times with the motor, adjust to no stuck, block and abnormal noise until the speed of opening and closing meets the requirements. After all the debugging is completed, install the protective cover.

Clean up: Painted or inlaid rail wall decorative surface, clean up the scene.

Yongkang Xiangrui Shutter Door Factory

Main business:

First, door categories: double aluminum rolling doors, plum lattice aluminum rolling doors, remote control electric doors, silencing shutter doors, wind shutter doors, mesh shutter doors, stainless steel connection doors, flap garage doors, perspective flap doors, European hair Blister shutter doors, industrial plant doors, glass sensor doors, electric retractable doors, induction gates, warehouse isolation network, and other custom installation.

Second, maintenance: Professional repair of various types of manual, electric shutter doors, flap garage doors, fire shutter doors, automatic sensor doors, rail, trackless electric retractable doors, manual, automatic gate gate, industrial plant doors, crystal shutter doors.

  contact number

City Council Network: 712410

Contact: Kong Zhihua

Contact address: No. 203, Huaxia Road, Changcheng Industrial Zone, Yongkang City

  Taobao shop: http://shop100552586.taobao.com