If a public or private suction truck is to be placed for a long time, it must not be taken lightly. If the general machinery is not used for too long, there will be many problems. So what should we prevent when the suction truck is not in use?

1, when the suction truck is idle, it should be done rust-proof work. Because the rust is mainly formed by the combined action of oxygen, moisture, and various corrosive substances in the air. Therefore, when the vehicle needs to be placed for a long time, it should be to clean the metal surface. The location of the parking or the need for frequent ventilation in the garage, preferably the relative humidity in the air can be maintained below 70. Water, dust, and stolen goods on the suction truck should be cleaned in a timely manner. Apply oil to the surface of the parts and parts that are easily rusted or wrap it with oil. The gaps on the various components of the machine must be well sealed.

2. Some seats and seat covers used in the cab of the suction truck are made of cotton and linen. This material is relatively easy to absorb moisture. In some long-term rainy days or relatively humid environment, it will be easy to have moisture moldy. Therefore, the driver of the suction truck needs to check these items frequently and take them out for cleaning and drying when appropriate.

3. The antiknock performance of gasoline depends on the high and low gasoline octane number. If the vehicle is in a long period of stagnation, then the octane value of gasoline will decrease with the loss of light components and the increase in the colloidal content. In this case, the antiknock property will gradually decrease. . Therefore, the fuel tank is to do a good job of sealing, and to avoid its temperature is too high.

4, suction truck can not be ignored during the idle period, it should be to start the engine at least one month, idling at 4-5 minutes, by the way to check the engine under a running condition. If something is abnormal, it is necessary to repair it immediately. In addition, it is also necessary to check the battery of the suction truck. The electrolyte level of the battery must be between 10-15 mm above the plate. In the case of insufficient electrolyte, distilled water should be injected immediately. Can keep a good enough power.

Cable Winches

Ganland offer a wide range of Cargo Control winches, including weld-on cargo winches, sliding winches, set screw winches and winch accessories, which is used to keep your trailer winch straps tight and secure and keep your valuable cargo tied down. All winches are made from high quality material and trained expertise for multiple applications, long service life and good performance.

Ganland winches are supplied for rich choice, including but not limited to construction: 304 grade stainless steel, steel, mild steel.

Finish: polished, galvanized, zinc plated, zinc plating-coloring.

Installation: weld on or bolt on. Different size and thickness.

Thank you for considering Ganland for your next purchase, if you are searching for truck / trailer spare parts don`t forget to check our extensive range, high quality and competitive price, OEM and ODM, welcome.

Cable Winches,Cargo Trailer Winch,Tie Down Winch Control,Wire Cable Winch

Jiaxing Ganland Auto Parts Co., Ltd. , https://www.ganlandparts.com