The monitoring also includes the preparation and recording of the acidity of the leaching solution, the quantity of the leaching solution injected into the well site and extracted from the mining site, continuously monitoring the main components and acid content in the solution, and the given pressure and stability of the injection manifold and the branch pipe. Sex, automatic recording of pumping station work, continuous monitoring of the liquid level and quantity of the solution in all sump and high-position tank pressure vessels, monitoring the main components, associated elements and acid content in the leaching solution. Construction and operation of in-situ immersed surface facilities The surface of the in-situ mining facilities includes the following main buildings: processing uranium-containing leaching devices, leaching solution preparation stations, pipelines for transporting process solutions, pumping stations for pumping solutions, for liquid collection or Pool with other liquids, other auxiliary facilities. The water and metallurgical processing facilities can be arranged in three ways: the first is a facility that is uniformly installed in the industrial site, which can process all the product liquids stably for a long time, but as the new mining layer is mined, the pipeline laying and length are also increased. The second is to set up a local processing facility with a total production capacity equivalent to the product volume of all the production blocks. The installation of the local device is relatively simple. It is suitable for the extension of the ore body and the ore body away from the industrial site or the ore body of the deposit. The local device can reduce the length of the main pipe and the construction of the pumping station, but increase the construction cost and installation. The amount of work. The third is to set only the adsorption device, and the car sends the saturated resin to the desorption tower. Pipeline transportation classification process pipelines can be divided into: product liquid pipelines for transporting industrial concentration, transporting tail liquid pipelines, pipelines for effective acidification of blocks, transporting concentrated acid pipelines, compressors to the characteristics of different liquids. The suction hole is supplied to the gas pipe to transport the oxidant pipe. Air Filters are the first line of defense to foreign contaminants which will decrease the life of your compressed air system and compressor oil. We guarantee that all of our compressed air filters will fit your compressor, vacuum pump or blower based on the OEM part number. Inlet air filters should be routinely monitored in order to insure that you are geting the most out of your air compressor, vacuum pump or blower. We do not recommend blowing out the inlet filter when it becomes clogged, instead it should be replaced. Depending on the environment, your Air Filter should be inspected at least once per month. Please contact our sales team with any questions regarding your air filter or maintenance on your compressed air system.
Canister(Cartridge) Oil Filter Element-This consists of an element inside a metal canister. The canister must be opened, and the new filter installed inside the cavity. This element may be a variety of materials(metal mesh, synthetic, paper, or cloth) and will be manufactured with micron ratings compatible to the OEM specifications.Sinofiltec offers branded and high quality replacement filters for all domestic and international compressor OEMs.
Compressor Air Filters,Compressed Air Filter,Air Compressor Air Filter Henan Sinofiltec Technology Co.,Ltd , http://www.sinofiltec.com
Most of our compressed air filters are made with a micron rating of 5 or 10 depending on the OEM specifications set forth by each manufacturer. We carry a wide range of air filters for all the major manufacturers of Rotary Screw, Reciprocating and centrifugal air compressors. Air Compressor Services also supplies air flers for blowers and vacuum pumps. Our air filters for compressors are manufactured with the highest quality fiter media available to provide continued protection for your compressed air system.Spin-On Oil Filter Element-Simple removal by spinning off and replacing the element. Manufactured of synthetic, paper, metal mesh or cloth, with a micron rating which varies based on manufacturer specifications.
The proper selection and use of compressed air filters will prevent many short and long term problems with your compressed air equipment and systems and save you substantialy in down-time and component replacement costs over the life of your compressed air system.
Oil Filters present the second barrier of protection. These are usually rated at 10 to 20 microns. Filter Material is also paper or synthetic, and can be surface loading or depth loading.
(contaminants enter the filter media and are trapped within the depth of the media, rather than only on the surface.)
Construction and operation of in-situ leaching facilities