Dredging is an excavation activity usually carried out underwater, in shallow seas or freshwater areas with the purpose of gathering up bottom sediments and disposing of them at a different location. This technique is often used to keep waterways navigable. It is also used as a way to replenish sand on some public beaches, where sand has been lost because of coastal erosion. Dredging is also used as a technique for fishing for certain species of edible clams and crabs (see fishing dredge).
Photo of our Dredger :
Types of dredging vessels Dredger Cutter Suction Dredger,Bucket Dredger,Grab Dredger,Trailing Hopper Suction Dredger Unisite Group Ltd. , http://www.unisitemarine.com
Suction
The dredge Drag Head of a suction dredge Barge on the Vistula River, Warsaw, Poland
The Geopotes 14 lifting its boom on a canal in The Netherlands. (gēopotēs is Greek for "that which drinks earth")
For suction-type excavation out of water, see Suction excavator.
These operate by sucking through a long tube, like some vacuum cleaners but on a larger scale.
A Plain Suction Dredger has no tool at the end of the Suction Pipe to disturb the material. This is often the most commonly used form of dredging.[citation needed]
Trailing suction
A trailing Suction Hopper Dredger (TSHD) trails its suction pipe when working. The pipe, which is fitted with a dredge drag head, loads the dredge spoil into one or more hoppers in the vessel. When the hoppers are full, the TSHD sails to a disposal area and either dumps the material through doors in the hull or pumps the material out of the hoppers. Some dredges also self-offload using drag buckets and conveyors.
The largest trailing suction hopper dredgers in the world are currently Jan De Nul's Cristobal Colon (launched 4 July 2008) and its sister ship Leiv Eriksson (launched 4 September 2009. Main design specs for the Cristobal Colon and the Leiv Eriksson are: 46,000 cubic metre hopper and a design dredging depth of 155 m.[3] Next largest is HAM 318 (Van Oord) with its 37,293 cubic metre hopper and a maximum dredging depth of 101 m.
Cutter-suction
A cutter-suction dredger's (CSD) Suction Tube has a cutting mechanism at the suction inlet. The cutting mechanism loosens the bed material and transports it to the Suction Mouth. The dredged material is usually sucked up by a wear-resistant centrifugal pump and discharged either through a pipe line or to a barge. Cutter-suction dredgers are most often used in geological areas consisting of hard surface materials (for example gravel deposits or surface bedrock) where a standard suction dredger would be ineffective. In recent years, dredgers with more powerful cutters have been built in order to excavate harder rock without the need for blasting.
The two largest cutter suction dredgers in the world are currently (as at August 2009) DEME's D'Artagnan (28,200 kW total installed power)and Jan De Nul's J.F.J. DeNul (27,240 kW).both built by IHC Merwede.
Auger suction
This process functions like a Cutter Suction Dredger, but the cutting tool is a rotating Archimedean screw set at right angles to the suction pipe. The first widely used auger dredges were designed in the 1980s by Mud Cat Dredges, which was run by National Car Rental, but is now a Division of Ellicott Dredges. In 1996, IMS Dredges introduced a self-propelled version of the auger dredge that allows the system to propel itself without the use of anchors or cables. During the 1980s and 1990s auger dredges were primarily used for sludge removal applications from waste water treatment plants. Today, auger dredges are used for a wider variety of applications including river maintenance and sand mining.
The most common auger dredge on the global market today is the Versi-Dredge. The turbidity shroud on auger dredge systems creates a strong suction vacuum, causing much less turbidity than conical (basket) type cutterheads and so they are preferred for environmental applications. The vacuum created by the shroud and the ability to convey material to the pump faster makes auger dredge systems more productive than similar sized conical (basket) type cutterhead dredges.
Mu Linsen "control cost expansion capacity" double axe cut packaging market profit
The LED packaging market is rapidly expanding by the east wind: LED is called the fourth-generation lighting source or green light source. Compared with the traditional light source, the LED light source has many advantages such as energy saving, environmental protection and long service life. LED packaging manufacturers face huge opportunities for growth in the overall industry. In 2013, the global LED packaging market model was $14.4 billion. It is estimated that by 2018, the global packaging market model will reach 25.9 billion US dollars. Up to 12.5. In 2010, China's LED packaging market model was 27 billion yuan, and in 2014 it grew to 56.8 billion yuan, with a compound annual growth rate of 20.43. It is expected that the LED packaging market model will maintain a high-speed trend in the next two years. . Mulinsen focuses on LED packaging manufacturing and leads the industry: Mulinsen has been focusing on the research, production and sales of LED packaging and application products. It is a major supplier of LED packaging and application products in China. According to the 2014 annual report, the company achieved operating income of 4.002 billion yuan, an increase of 39.25 over the previous year. The company's revenue was the first in the same industry in the country. The company's compound revenue growth rate reached 37.48 in the past five years, and the compound growth rate of assets reached 40.45. Controlling cost expansion capacity provides double growth pole for Mulinsen's profit growth: the company controls production costs by optimizing product structure and using model economy, and improves the company's comprehensive gross profit margin. High sales net interest rate, high return on capital, and the company's production equipment are close to full-load production status throughout the year, which provides the necessary capacity for Mulinsen to expand production capacity. The company's successful listing has provided financial support for expanding production capacity. Investment Strategy: We expect the company's operating income in 2015-2016 to be 53.74 and 7.040 billion yuan respectively, with a year-on-year growth rate of 34.3 and 31.0, EPS of 1.43 and 1.78 yuan respectively, and PE valuations of 31.5 and 25.3 times respectively. We believe that Mulinsen is an industry-leading LED packaging company, keeping up with trends and tight opportunities, and giving coverage for the first time. Risk warning: increased competition in the industry, risk of falling prices; risk of rising costs; risk of capacity expansion.