The revolutionary articles of the electrothermal thermostat incubator circuit control system have been published many years ago. This has a very important guiding role in the improvement of the electrothermal incubator. This article is very useful for instructing inspection personnel or equipment maintenance personnel to make small changes to old-fashioned equipment, and it is worth promoting. Wechat scans, information is known! : EV Drive Motor General Assembly Line
The copper coil of the stator will be trickled by servo nozzles after preheated. Then the stator will be unloaded before gelated and cured to achieve insulation effect. The servo trickling module, high-accuracy scale and data traceability help avoid varnish stains on the stack. It boasts of resin quantitative control, fast model transfer with multiple fixture designs and automatic nozzle positioning.
The trickling technology is popular for stators' impregnation to achieve the insulating function as desired. The automation, cycle time and trickling accuracy are adjustable based on the customer specifications. HMI is adopted for operators to check or adjust parameters and enable the production line to communicate with the other lines both in front and at the back at the customer workshop.
Ev Drive Motor General Assembly Line,Ev Drive Motor Smart Production,Ev Motor Smart Assembly Line,Electric Drive Motor Assembly Line Wujiang Jinlan Machinery Manufacture Co.,Ltd , https://www.jinlan-technology.com
However, the original circuit can be further simplified. The simplified circuit eliminates the need for high-cost and difficult-to-buy power transformers. Because the constant-temperature incubator maintains a long-term power state, the power transformer is more demanding, and energy-saving types are usually used. Transformer or use two ordinary power transformers in series, can also save an electrolytic capacitor, so that the cost is lower, work more reliable.
In addition, there are several errors in the electric constant temperature incubator circuit, (1) the polarity of the rectifier bridge is drawn incorrectly; (2) the electrolytic capacitor is not marked with polarity; (3) the triac symbol is drawn incorrectly. It is necessary to correct it here.
Electric thermostatic incubator circuit modification plan