Copper Wire Mesh has good properties of electrical and heat transfer, no magnetic, good corrosion resistance, low ductility and wear resistance
Brass mesh, phosphor bronze mesh and red copper mesh
The copper mesh screen all kinds of powder, particles, porcelain clay, glass, porcelain printing, filtering liquid, gas, etc.
We offered that you can trust. Welcome to do business with us.
Mesh Sieve,Liquid Test Sieve,90 Micron Sieve,Copper Test Sieve Xinxiang Xin Ming De Machinery Co., Ltd. , https://www.xmdsieve.com
The most common reason is that the performance of the electronic crane scale transmitter is not good. It can use the cable to transmit signals for comparison and detection. If it is confirmed that it is a transmitter problem, it can be repaired according to the situation or directly replaced to eliminate the malfunction. . 
If the test indicates that the electronic hook scale transmitter is normal, other components such as batteries and antennas may be inspected to see if there are any problems. In general, if the scale body battery is in poor contact, or if the antenna leads are not in good contact, signal instability will occur. In addition, signals may be unstable if the distance is too far or the battery voltage is insufficient.
Normally, two electronic hook scales with the same frequency are used together, and signal instability or errors will occur. This should be noted during the purchase and installation process.
Factors affecting the electronic crane scale
After the electronic hanging scale sensor is used for a period of time, its ability to maintain its constant performance is stable. In addition to its own structure, the main factors affecting the long-term stability of the electronic hanging scale sensor are the environment, which is mainly responsible for its impact. The electronic crane scale sensor has good stability and must have strong adaptability. Therefore, we must pay special attention before the purchase of electronic scales can be divided into two kinds is to look directly at a wireless, and wireless electronic crane scale is Using the wireless transmission method, the results obtained by the weighing are displayed on the display, so that the transmitted signal is unstable and a weighing error occurs. How is it caused?