1. Unscrew the plug and raise the jack upright. Inject the No. 20 mechanical oil from the screw hole where the plug is located. The oil injection amount is about 2/3 of the tank volume. After filling the oil, tighten the plug.
Hony Plastics was established in Shenzhen, China in 2008, focused on high performance engineering plastic semiconductor test&rework solutions.
Our products include: Standard test solution, standard test socket &jigs, customized sockets, Jig& Automation, FA support, Rework solutions, rework services.
Be the world`s leading socket supplier
As an IC testing socket supplier, we focus on Semiconductor Testing Research and Innovations, has Achieved a lot of Patents.
And also get the certificate of National High-tech.
Create value for our customers
We are committed to provide the most competitive price, highest quality, best custom design, shortest lead time, and most professional service for our customer all over the world. Work closely with customer and enable them to achieve greater manufacturing efficiency and productivity.
Material include : PEEK PPS PEI PEEK Ceramic PAI etc.
Peek Cnc Machined Part,Pps Processing Part,Pei Precision Cnc Part,Pai Machined Part Hony Engineering Plastics Co.,Ltd. , https://www.honyplastic.com
2. Tighten the oil return handle, pull the oil pump handle out and push it up and down, and the jaws can be opened.
3. Depending on the site requirements, the jacks of the jacks can work either down or flat (the handles are not working horizontally). When the jaws are facing up, the venting valve at the front end of the pump body must be opened; when the jaws are facing down, the venting valve at the rear end of the pump body must be opened.
4. Unscrew the oil return handle and the jaws will automatically reset.
Combined clamp jack safe operation procedure