Pocket Lightning Counter Tester Tips

Pocket Lightning Counter Tester Technical Features:

1. Pocket type lightning counter tester output can be adjusted in three levels: high, medium and low, can adapt to different types and labels of the lightning strike counter's action check 2, test interval is short (about 1 second), and does not follow the power Xialong extension 3, containing a dedicated Ni-H rechargeable battery pack, large capacity, can be tested up to 300 times after being filled. 4. Refillable, completely eliminating the trouble of frequent battery replacement or damage caused by battery leakage. Small size, light weight, easy to carry 6, strap shockproof jacket 7, instructions directly printed in the cover tongue 8, start discharge function: high pressure does not use two minutes to automatically lift the high pressure 9、 versatility: applicable to each A variety of types of lightning strike counters 10 are easy to operate and safe. Press the test button to automatically complete the charge and discharge process.

1, the output voltage: 0 ~ 1200V adjustable 2, capacity: 10μF

3, action time: 1 ~ 2 seconds / time 4, power supply: DC 1.5VX8 section 5, liquid crystal display: 9V

6, appearance: 200 × 115 × 45mm

Pocket Lightning Counter Tester Usage:

1. Insert the grounding wire at the bottom before using the pocket lightning counter tester.

2. The power switch is set between the body and the head, and rotates in any direction by 90 degrees. After hearing the “click” sound, it means turning on the power, and vice versa, turning off the power.

3, After the power is turned on, the green light is on. When the red light is on (about 3~5 seconds), the lightning strike counter can be tested through the head telescopic conductive rod (it can be pulled out when the power is not turned on according to the installation height of the counter). There is no need to turn off the power and it can be tested repeatedly (every time charging conductive rod should leave).

Milk Pot

Stainless steel Milk pot manufacturer in China

Our milk pot are made of high grade stainless steel,conducts heat better,it boiling more quickly than inferior tin products.Easy to clean,won't stain,peel,or pit like others!Unlike enamel coated Pans,this won't peel and it won't pit or scatch easily.All of milk pots need to do inspection before shipment to ensure your total satisfaction!

Milk Pot,Mini Milk Pot,Stainless Steel Milk Pot,Ceramic Milk Pot

Jiangmen Yuesheng Metal Products Co., Ltd. , https://www.bestgain-hk.com