Dongfeng's 11-ton sprinkler is a relatively common model in everyday life and can be seen all year round. For special vehicles with such a high attendance rate, if they are not properly maintained, there will be various problems with the long-term use of the Ken family. Therefore, it must be regularly maintained during use. Paints, batteries, sprinkler pumps, tires, and engine compartments are the more important parts of Dongfeng's 11-ton sprinkler . These five parts require frequent inspections and maintenance by the staff. First, the maintenance of car paint After a long period of rain erosion, sunlight exposure, and sand blowing, the paint surface gradually loses light. There is also a vehicle scraping or malicious scratching that can cause various kinds of paint damage. As a result, the “skin disease†symptoms such as paint oxidation, dirt, cracking, discoloration, and scratches often appear on the surface of the sprinkler. Therefore, in the season, the surface of the sprinkler should be cleaned, polished, waxed, sealed, or coated with a series of beauty treatments. Second, the battery maintenance The electrode connection of the sprinkler battery is the most prone to problems. When the driver inspects, if there is a green oxide at the electrode connection, it must be flushed with boiling water. These green oxides will cause the generator to run low, causing the battery to be in a depleted condition. In severe cases, it will cause the battery to be scrapped or sprinkled. The car could not reach the fire. Three, sprinkler pump maintenance Sprinkler Sprinkler is a two-ply glued sprinkling pump. When subjected to an external impact, if the strength is not enough to make it broken and only a crack occurs, the glue in the middle will come out and be separated from the atmospheric pressure. If it continues, Driving, the crack area will increase, affecting sight and driving safety. Sprinkler Sprinkler Repair For cracks or small wounds on sprinkling water pumps, the operation time is short and will not affect the daily use of the car. Fourth, tire maintenance Tyres play a decisive role in vehicle safety. Especially in winter, due to relatively low temperatures, tires should be replenished with air pressure to keep them within the specified air pressure range. At the same time, the tires should also be inspected for scratches because rubber tends to become hard and brittle in winter. Easy to leak, and even puncture. Fifth, engine compartment maintenance Always check the engine compartment of the sprinkler for oil, brake fluid, and antifreeze fluid for deterioration and adequacy. Replace them regularly. The replacement of the oil is also a maintenance of the engine, and good oil can ensure the good work of the engine. The sprinkler manufacturers reminded that when maintaining the 11-ton sprinkler of Dongfeng , we must find the key parts, so as to achieve a multiplier effect. Not only do you have to do maintenance on the sprinkler, you need to care for the sprinkler during use.
Polyvinyl Chloride or PVC Resin SG3, SG5, SG7 and SG8 are homopolymers made by suspension polymerization. PVC resin is white powder form thermoplastic resin and has great versatility for making plastic products.
SG3 is for films, hoses, leathers, wire cables and other general purpose soft products.
SG5 is for pipes, fittings, panels, calendaring, injection, moulding, profiles, and sandals.
SG7 / SG8 is for bottles, sheets, calendaring, rigid injection and moulding pipes.
Pvc Resin,Pvc Suspension Resin,Polyvinylchloride Resin,Pvc Resin Suspension Grade Yucheng Jinhe Industrial Co.,Ltd , https://www.hnironoxide.com
The maintenance of the five components of the sprinkler is worth reading